The Key Benefits of Online Power Tool Spare Parts

 

There is absolutely no need to throw away broken power tools these days, thanks to the availability of repair manuals and power tool spare parts on the internet. Power tools only usually die due to a broken switch, broken power cord, worn out brushes and snapped drive belts.
Power tools with powerful motors usually suffer eventually from a broken power switch, which is very easy to repair. Body grinders and circular saws are particularly prone to broken switches. Again, an online search should reveal the part number of the switch, which can be purchased online at a very cheap price. To replace it, remove the wires from the switch and push the switch out. Then, it is just a case of pushing in the new one and attaching the wires.
Power cord issues are more difficult to diagnose. The best way to discover wear broken wires are located in the cord is to push needles into the cord and monitor using electricity meter clips. A new piece of cord can easily be purchased online and attached to the old cord before the break. An old computer power cord can also be used as a replacement cord.
Body Grinders, routers, and other tools that run at high loads for long periods of time wear out their brushes quickest. Fortunately, it is possible to check up on the brushes condition by removing a plastic cover on the power tool that is held in place with a bolt. It is worth purchasing some replacement brushes from a reputable online store that sells power tool spare parts, so that they can be replaced before they completely wear out. Replacing the brushes is very easy with the help of an online repair manual specific to the power tool model.
Power tools that use a drive belt, such as belt-sanders, planers and rug-beater style vacuum cleaners usually die because the belt has snapped due to wear. Entering the model of the power tool along with the words-replacement drive belt into a search engine, will give you the part number for your specific belt. You can then order a new one at a chap price from a good online retailer. With the help of an online manual for your specific power tool, you should be able to replace the drive belt with ease.

There is absolutely no need to throw away broken power tools these days, thanks to the availability of repair manuals and power tool spare parts on the internet. Power tools only usually die due to a broken switch, broken power cord, worn out brushes and snapped drive belts.

Continue reading The Key Benefits of Online Power Tool Spare Parts

The Lazy DIYer’s Guide to Repairing Power Tools

 

It is very easy to fix power tools these days, thanks to online manuals, and the availability of power tool spare parts online. Power tools generally only in certain ways. Usually it is due to broken brushes, switches, drive belts and power cords. All of these are easy to get hold of and replace.
Any power tool that uses a drive belt usually dies because it has broken. It is easy to tell if a drive belt has broken as the motor will spin, but nothing will happen. Doing an online search containing your power tool model and replacement drive belt should provide you will the part number. Once you have that you can do a search with that part number and find a good price from a good seller, it is then very simple to replace the belt with help from an online manual.
Brushes usually don’t die suddenly and are really easy to check on a good power tool, so they can be replaced before they die out. They are typically situated under a plastic cover held in place with a bolt. Brushes for a specific power tool can easily be replaced and brushes are easy to find on the internet by discovering the model’s part number.
Power tools that have a powerful motor tend to suffer from a broken switch. Circle-saws almost always stop working due to a broken switch, body grinders are also likely to have a broken switch if one dies. Again, an internet search will reveal the part number of the switch, it is then a case of replacing it. This is easily done by removing the wires to the switch, pushing out the old one before pushing in a new one and reconnecting the wires. Simple!
Broken power cords are more difficult to diagnose, but are incredibly easy to repair. a pair of meter clips attached to needles that have been pushed inside the power cord (with the power off) should reveal where the break is in the internal wires. Then the cord can be cut and another cord can be attached. Power cables are very cheap and can easily be found at retailers selling power tool spare parts. It is also possible to use an old power cord for an electronic device that is no longer used.

It is very easy to fix power tools these days, thanks to online manuals, and the availability of power tool spare parts online. Power tools generally only in certain ways. Usually it is due to broken brushes, switches, drive belts and power cords. All of these are easy to get hold of and replace.

Continue reading The Lazy DIYer’s Guide to Repairing Power Tools

The Top 5 Ways to Fix Your Power Tools Yourself

 

Power tools are just as useful for DIY home renovation projects as they are for professional use. They help save time and make the task easier for the user. However, continued use, improper handling, and poor maintenance can sometimes make the tools malfunction. When this happens, you need to know how to fix the problem. Here is how you can go about it:
[strong]Diagnosing the Problem[/strong]
Trying to pinpoint the problem is usually the most important yet tricky part of fixing power tools. Nonetheless, you have to know this before you do anything else because at times, tightening a loose wire is all the fixing you may need to do. The tool’s manual can come in handy in problem diagnosis.
[strong]Getting Spare Parts[/strong]
While some repairs are simple, there are those which may require you to break down the motor. In such instances, you may also have to get power tool spare parts from a tool centre. As you do this, it’s important that you find compatible replacements to avoid causing further damage.
[strong]
Replacing the Cord[/strong]
When repairing power tools, you need to adhere to safety. You have to look out for broken or rusted parts and unplug the equipment from the power source before you try to take it apart. To replace the cord, you should remove the casing, disconnect the cord wires and then replace them with the new ones, ensuring that each of them goes to the correct terminal. The safety cover should be replaced once the task is completed.
[strong]Brush Replacements[/strong]
Carbon brushes transfer current from the motor to other parts of your tools – they act like a bridge between the different parts. Thus, with continued use, these brushes are bound to wear out at some point. The good thing is that making brush replacements is one of the simplest tasks in power tool repairs. You only need to obtain the right replacements, disassemble the motor, locate and slide out the old brushes, slip in the new ones in the same spot and then reassemble the parts tightly.
[strong]
Replacing Switches [/strong]
Switches are meant to turn the router on and off as needed but when used over a long period, they are likely to get damaged. Replacing switches is easy because for one, the replacements ones are not expensive and once you have one in hand, you can simply insert it into the housing (once you remove the old one)and restore your tool into its useful state again. With these simple steps, you don’t have to toss your tool aside every time it seems to go dead.

Power tools are just as useful for DIY home renovation projects as they are for professional use. They help save time and make the task easier for the user. However, continued use, improper handling, and poor maintenance can sometimes make the tools malfunction. When this happens, you need to know how to fix the problem. Here is how you can go about it:

Continue reading The Top 5 Ways to Fix Your Power Tools Yourself

2014 Predictions For The Power Tool Industry

 

In 2014 Fein Power Tools will launch a new series of cordless and portable tools. This includes a range of cordless drill drivers, hammer drills, and impact wrenches that have been designed to provide powerful torque transfers for metalworking. There will also be eight four-speed cordless drills that feature brushless motor technology. All of these new power tools will feature metal gear heads, fiberglass reinforced, barrel motor housings, as well as dust-proof bearings and encapsulated electronics. The company will also offer four two-speed, cordless hammer drills with a maximum torque of 2,212 inches/lb and 9,350 to 29,000 impacts per minute. Fein Power Tools will also introduce the Slugger® JHM portable magnetic drill. The 22lb, low-profile drill is designed for portable hole-making in metalworking applications. The drill features a 430 Watt, 680-RPM motor, and can is able to make 1.1875-inch diameter holes quickly. It includes an arbor for 0.75 inches, Weldon shank annular cutters, spring slug ejection, and uses a gravity fed coolant. As the drill is just 11 inches in height, it can fit into tight places. It is designed to be used in overhead and upside-down drilling due to its removable gravity fed coolant bottle. The aluminum frame comes with high-impact plastic inserts so it can withstand high production hole-making. All of the drill’s wiring is contained in order to prevent from snagging or getting caught when it is in a restricted area.
ESAB will introduce its new welding machine, called Warrior. It has been designed to operate perfectly in extreme hot and cold conditions and will be able to handle a wide variety of welding applications. Warrior is also going to be very easy to use thanks to its intuitive front control panel with a read anywhere display. The welding machine also features state of the art inverter technology that provides significant energy savings. ESAB report that they consulted and listened to expert welders from all over the world and designed a machine accordingly. Warrior should be able to provide superior starts with a very stable arc transfer that produces excellent weld finishes.
Also in 2014, the M.K. Morse Company will introduce new band saws, blades and power tool spares. This will include the Morse 811 portable band saw blade. It is designed for cutting a variety of sizes and types of materials with a single blade. This new blade will combine an aggressive tooth with a variable tooth pattern, which will help reduce vibration and increase its cutting speed. The tips of the blade’s teeth are made of high-speed steel, and the blade is 0.5 inches wide and 0.02 inches thick. It comes in a variety of blade sizes, and are suitable for corded and cordless portable band-saws.

In 2014 Fein Power Tools will launch a new series of cordless and portable tools. This includes a range of cordless drill drivers, hammer drills, and impact wrenches that have been designed to provide powerful torque transfers for metalworking. There will also be eight four-speed cordless drills that feature brushless motor technology. All of these new power tools will feature metal gear heads, fiberglass reinforced, barrel motor housings, as well as dust-proof bearings and encapsulated electronics.

Continue reading 2014 Predictions For The Power Tool Industry